Description
Red pl mount
Lens Fitting: PL mount
Camera/Camcorder Fitting: RED DSMC/DSMC 2
Brand: Ironglassadapters
This camera mount allows to use PL mount lenses on RED cameras. It is compatible with DSMC and DSMC 2 brain:
Weapon
Epic/Scarlet Dragon
Scarlet -W
Epic/Scarlet M-X
Lens mount to Red Epic Scarlet Dragon DSMC camera mount
The adapter is delivered with 4 setting screws and a key.
The adapter is delivered in a cover and a box.
SPECIFICATIONS
INFINITY FOCUSING
LOCATING PIN PLACED EXACTLY 45 DEGREE CLOCKWISE
THE ELECTRICAL PINS ARE PROTECTED AGAINST SHORT CIRCUIT
HOLDS ANY PRIME AND ZOOM WHICH DO NOT HAVE TO BE SUPPORTED
PORT CAP and MOUNTING SCREW inc.
0.002mm ACCURACY
MADE OF AIRCRAFT / MILITARY GRADE ALLOY
BLACK ANODIZED
MADE IN UKRAINE
DIRECT FROM THE MANUFACTURER
DIMENSIONS
First, unscrew the PL mount using a torx screwdriver.
Now remove the PL mount, work slowly, there is a delicate cable that should be taken care of.
The PL red one ef mount mount is removed.
We have to disconnect the cable from the PL mount.
This is the plug, pull it carefully.
Ok, now we have to remove the collimation base of the camera.
Be careful, the cable goes through a hole in that ring.
Another view.
After removing it, we have to fold the cable four times.
And put it together inside a small plastic tube.
We are ready to install the Leitax mount.
First, lomo anamorphic lens the base ring, that has an appropriate space to fit the cable without make any damage to it.
The ring is screwed to the camera using the provided screws.
Find the right position.
And screw them using an Allen tool.
Ready.
Now, let’s screw this ring on it.
Screw it until it is flush with the base ring, or even a bit more.
Ready.
Now, we can screw the rest of the mount.
Here in this picture, the Leitax Canon mount and the collimation ring are already attached together.
Screw until it reaches the deeper position.
And secure it rotating the first ring against the mount until they get stuck and cannot move.
This ring ironglassadapters.com can be secured with this locking screw.
Rotating the Canon mount ring counter clock wise, we make it ready to use Canon mount lenses..
Like this Leica-R Apo-Summicron 90/2 Aspherical, that uses a Leitax Canon mount.
The prototype in the picture has an orange line for the lens positioning. But the production units have the more traditional red dot.
This is how the lens can enter the mount.
And now just rotate it clock wise until the lens hits the hard stop.
And this is the special feature of this mount: rotating clockwise this knurled ring, the lens will be positively locked to the mount.